气体检测仪常见气体

气体检测仪常见气体
栏目 Reference
星期四, 01 10月 2020 10:15

Renesas:Outdoor Sensor for Automatic Home or Building HVAC System

The outdoor sensor unit(s) for automatic home or building HVAC systems provide outdoor data from one or multiple bearings (North, East, West, South) to a master actuator. This can be one or all of the following data:​

  • Outdoor air quality (OAQ according to the Environmental Protection Agency)​
  • Temperature and relative humidity (degrees, percentage)​​
  • Light/Sun (lux)​​
  • Barometric pressure (mbar)​​
查看 47475 次
栏目 解决方案和应用示例
来源
阅读更多...
星期三, 30 09月 2020 18:34

Renesas:IoT Sensor Board with Machine Learning & Bluetooth® Low Energy

男作者
This is a reference design for a versatile Internet of Things (IoT) sensor board solution. It targets applications in industrial predictive maintenance, smart home/IoT appliances with gesture recognition, wearables (activity tracking), and mobile for innovative human machine interface, or HMI, (FingerSense) solutions. This reference design was developed with Renesas partner Qeexo, who provided their Automated Machine Learning platform (AutoML) for edge devices.
栏目 蓝牙模块
来源

How PEPS technology is opening the doors to the evolution of car access systems

Car access has become more convenient as design engineers take advantage of technologies that are widely used in other applications. The automotive industry has evolved from providing mechanical keys to unlock vehicles to fobs with buttons that can unlock vehicles. Now, the most common form of car access revolves around passive entry passive start (PEPS) systems, enabling drivers to enter their car but also start the engine without physically using a key.

栏目 技术文章

蓝牙5和Mesh技术为物联网市场带来强而有力的加值作用

物联网发展到如今，无线技术纷繁复杂，往往会出现在同一区域的不同设备上，这些无线通信设备之间会出现相互干扰的现象。然而，蓝牙5标准可以减少和其他无线通信技术之间存在的干扰，帮助设备在复杂的物联网环境中与其他无线设备并存。

蓝牙5是由蓝牙技术联盟在2016年提出的蓝牙技术标准，蓝牙5在蓝牙4.2核心规范上大幅提升效能，包括「2倍的传输速度」「4倍的传输距离」「8倍的广播数据传输量」等新优势，强化了在物联网方面的新特性,重点提高物联网的功能。

栏目 科普知识
阅读更多...
星期二, 22 09月 2020 00:57

Renesas Bluetooth® Low Energy Protocol Stack for RX family

To use the RX23W Bluetooth feature, a protocol stack conforming to the Bluetooth specification is required. Also, the Bluetooth-compliant profiles and mesh software enhance your Bluetooth product interoperability in a wide application area.
查看 54514 次
栏目 Bluetooth 5 (BLE5)协议栈
来源
下载附件:
阅读更多...

Renesas EK-RA4W1 Evaluation Kit for RA4W1 MCU Group

The EK-RA4W1 evaluation kit enables users to effortlessly evaluate the features of the RA4W1 MCU Group and develop embedded systems applications using Renesas' Flexible Software Package (FSP)and various IDEs.
栏目 开发板

Ti LAUNCHXL-CC2640R2:CC2640R2F wireless MCU LaunchPad™ development kit

This LaunchPad™ speeds development with a Bluetooth® Low Energy (BLE) connection using the CC2640R2F or CC2640R2L devices. The compatible SDK offers a fully qualified Bluetooth 5 protocol stack for single-mode BLE applications supporting high speed mode and example Bluetooth 5 coded physical layers (PHY) for long range mode testing. A Bluetooth 4.2 stack is also available.
Price：?29.00
栏目 开发板

意法半导体STM32WBx0系列

STM32WBx0是一款双核无线MCU，基于运行于64 MHz（应用处理器）ARM®Cortex®-M4内核和运行于32 MHz（网络处理器）的ARM®Cortex®-M0+内核。STM32WBx0系列是一个入门级解决方案，扩展了我们的产品组合，允许开发人员定义正确级别的功能，从而使他们的设计具有成本效益，并满足广泛的工业和消费物联网应用的需求。
栏目 蓝牙芯片
阅读更多...

STMicroelectronics Bluetooth low energy expansion board based on the BlueNRG-M0 module for STM32 Nucleo X-NUCLEO-IDB05A2

The X-NUCLEO-IDB05A2 Bluetooth low energy expansion board is based on the BlueNRG-M0 BLE network processor module.
The BlueNRG-M0 is Bluetooth v4.2 compliant, FCC and IC certified (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL). It supports simultaneous master/slave roles and can behave as a Bluetooth low energy sensor and hub device at the same time.
The BlueNRG-M0 provides a complete RF platform in a tiny form factor, with integrated radio, antenna, high frequency and LPO oscillators.
The X-NUCLEO-IDB05A2 is compatible with the ST morpho (not mounted) and Arduino UNO R3 connector layout.
The X-NUCLEO-IDB05A2 interfaces with the STM32 microcontroller via the SPI pin and allows changing the default SPI clock, SPI chip select and SPI IRQ by replacing a resistor on the expansion board.
栏目 开发板
第 89 页 共 98 页
购物车是空的
 

登陆

Advertisement

Please support our site by viewing this advertisement

Free Content

最近更新